Clik here to view.
General discussion • IMPLEMENTATION OF HARDFAULT HANDLER IN PICO-SDK
Hello everyone,I'm encountering a hardfault issue with my Raspberry Pi Pico SDK project. My controller gets stuck in a hardfault state, and I am unsure how to handle it properly. Ideally, I would...
View ArticleGeneral discussion • YouTube ads are not blocked on chromium-browser v125
A few hours ago, I received an update for Chromium from the default PiOS Bookworm 64-bit repositories. It was upgraded from 124.0.6367.73-rpt1 to 125.0.6422.133-rpt1, then I restarted the browser.For...
View ArticleUbuntu • Re: BAR of PCIe devices seems incorrect
PCIe addressing is quite complex, involving multiple mappings - it's easy to get confused. This is how it is meant to work:1. The address shown in a pci_resource_start is the physical address of the...
View ArticleGeneral discussion • Re: YouTube ads are not blocked on chromium-browser v125
youtube changed 2 days ago over here, ads are now with out a skip button.oops, sorry not using chromium so don't have a link to that add on version.it's not the browser, it's a change in youtube, they...
View ArticleHATs and other add-ons • Re: Is the speed of the Raspberry Pi M.2 HAT + SSD...
The HAT supplies 3.3V 3A to the slot - enough for the 2.5A maximum continuous maximum current draw of M.2 Socket 3. Note that some SSDs can spike above 2.5A for short periods - but we've not seen any...
View ArticleHATs and other add-ons • Re: AI Kit + NVMe SSD ?
... It would be great if someone could go through the models in the zoo and check how the performance depends on PCIe speed.Why isn't that someone you?Statistics: Posted by aBUGSworstnightmare — Wed...
View ArticleTroubleshooting • Re: Impossible to get rid of under voltage errors (3B)
Which OS are you using? Is it fully updated?What else is connected to your Pi?Statistics: Posted by rpiMike — Wed Jun 12, 2024 6:35 am
View ArticleGeneral discussion • Re: Raspberry pi 4b running circuit python not detected...
I was trying to run Circuit python without an OS(bare metal) for the first time on the raspberry pi 4b. I followed all the instructions in the Adafruit website but my raspberry pi does not register as...
View ArticleTroubleshooting • Re: Sending 3.3V from one RPi to a second RPi's GPIO stops...
In this project, the two Pis won't be able to be grounded together,Why not? You've got wires going from one Pi to the other, why not add a 0V /Ground wire as well? Connect pin 6 on one pi to pin 6 on...
View ArticleRaspberry Pi Connect • Re: rpi-connect on Zero 2W
Hi,I've just got a Pi Zero 2 W and have installed 64 bit Bookworm and am trying to get rpi-connect to work but it is failing on the check for Wayland. When I check the sessions it shows up that I am...
View ArticleAdvanced users • Re: Testing class A2 SD cards with Command Queueing on Pi 5
There is at least one blocker that prevents this becoming the default: surprise card removal handling is woefully inadequate. I can get CQE into a state where it never reports errors or timeouts for...
View ArticleAutomation, sensing and robotics • Re: Current sensing and control
The usual bench power supply seen in laboratories have the feature to set a limit current. Very handy for e.g. LED testing: you set the current to max 20mA, the voltage to 5V and connect the LED...
View ArticleGeneral discussion • Re: Fake/wrong packaging Raspberry pi 5?
Hi guys,Got my first pi5 and my packaging was kinda open when i received it. Comparing to all unboxing vids my surface on the opening area is completely red instead of being completely white.(area...
View ArticleTroubleshooting • Help !! Unable to read Partition as FAT issue !!
Hello everyoneI am using Raspberry Pi 4b and today I encountered an issue when booting.During first boot or power on Pi boots fine but after each reboot it says Unable to read partition as...
View ArticleGeneral discussion • Re: Rasberry Pi Touch Screen not working correctly with...
what rpi devicewhich os versionsounds like the normal response when using a X11 setup.I am using a Raspberry Pi 3B+ and an official raspberry pi touch screen on os Debian GNU/Linux 12. How would you...
View ArticleOther RP2040 boards • Re: Custom Board not going into BOOTSEL mode using switch
Show us the complete schematics and PCB layout. For instance how is the 3.3V supply created?Statistics: Posted by dp11 — Thu Jun 13, 2024 5:54 am
View ArticleNetworking and servers • Building a new pi cluster-ish
Bought a Pi5 with dual nvme hat.I went to setup boot from nvme - somebody suggested to use zfs had a bit of a look into it and was thinking what I want I think is 2 x pi5 with dual nvme hat with 2 x...
View ArticleGeneral • Re: How to disable the BOOTSEL pin
To increase the difficulty of dump uf2 file.Is it possible to disable the SWD pin in my application code?Or is it possible to write the hash value of uid of the pico board into the a fixed flash...
View ArticleTroubleshooting • Re: Pi 4 wifi works for a few days then I have to reinstall OS
Morning, I have scanned through the log and it's mostly from the day of the reboot (yesterday) and a few entries from the day before that (the 11th).I have (I think) saved this log in a .txt file with...
View ArticleCamera board • Use Gstreamer libcamerasrc and control dynamically camera at...
Hi, I have a C++ app which is getting streams from camera module 3 and streaming it over rtsp using opencv and gstreamer.Here is the issue I have now. I would love to ditch the opencv and just use...
View Article