more likely thing is maybe the pin or socket had a bit of dirt or I missed the receiving bit at the bottom of the socketafter the swap from 36 to 40 then back to 36 it seems to be working with it connected to pin 2, I cant think of a reason why apart from it needs a slight boost but it wouldn't make sense as the power would be disconnected in betweenSorry!I did have pico 1 going to JP 4 from a previous comment but I have corrected it back to 2 and still have them all retuning 1
Should have looked at my own schematic!!
Yes, pin 1 from the Pico goes to pin 4!! My mistake. Apologies.
Statistics: Posted by tom2 — Sun May 19, 2024 12:12 am